Bristorm Impeder Bollards – Shallow Mounts

The Bristorm Impeder Shallow Mount range of HVM bollards are made up of standard CHS sections, cast-in concrete or socketed.

View our Bristorm Impeder Bollards – Standard Foundation →

Cost-effective fixed high-security bollards capable of stopping a 7,500kg vehicle at 48kph (30mph).

An excellent choice for perimeter security the Impeder 30S Shallow Foundation Bollard has been successfully rated to BSI PAS 68, capable of stopping a 7,500kg vehicle at 48kph (30mph).
Set within either a concrete and rebar foundation or an ‘I Beam’, these products are supplied with full installation instructions and general arrangement drawings. The minimum arrangement for the Impeder 30S is two bollards.
During the test, the Impeder 30S Bollard achieved 0m penetration – a testament to its impressive stopping power. For sites that require protection from higher velocity attacks the Impeder 50S Bollard and Impeder 50 HD Bollard might be a more suitable option.
The steelwork for the bollard is hot-dip galvanised to BS EN ISO 1461 as standard providing the bollard with a high level of corrosion resistance. For sites where aesthetics are key, we can powder the coat the bollard with any RAL colour specified or fit it with a decorative sleeve.
The Impeder 30s offers a shallower option than most traditional fixed bollards, requiring a depth of only 400mm. For sites with even greater depth restrictions, we recommend taking a look at our extensive range of shallow mount bollards.

Download the datasheet

Vehicle (Kg)	Speed (mph)	Impact Angle	Standard	Performance Rating	Penetration	Major Debris
Vehicle (Kg)	7,500	Speed (mph)	30	Impact Angle	90	Standard	BSI PAS 68	Performance Rating	V/7500/48/90:0.0/0.0	Penetration	0.0m	Major Debris	0.0m

The Impeder Bollard 50S, is the shallowest bollard in the Bristorm Impeder range of high-security bollards.

Designed to combat high-velocity attacks, the Impeder 50S has been rated to IWA 14-1 (2013), easily withstanding a 7,200kg vehicle at 80kph (50mph).
Rated with a minimum array of two bollards, the Impeder successfully halted the vehicle with just 3m of penetration.
With a foundation depth of just 300mm, the Impeder 50s can be installed at sites where excavation depth is limited.
For sites with even greater depth constraints, we recommend taking a look at our range of shallow mount bollards which go as low as 40mm.
When it comes to security, the longevity of the solution is of the utmost performance.
With the Impeder range, every bollard has had its steelwork hot-dip galvanised to BS EN ISO 1461 as standard, giving it added protection against corrosion.
Set within either a concrete and rebar foundation or an i-beam, the bollards are made up of standard CHS sections, cast-in concrete socketed.
The products are supplied with full installation instructions and general arrangement drawings.
We understand that each project is different and the aesthetic needs of a site can vary greatly.
While the Impeder 50S comes in a galvanised finish as standard, we offer the option to powder coat the bollard to any RAL colour specified.
The Impeder 50S can also be fitted with a bespoke decorative sleeve – Giving you the look you need without compromising on security.
While the bollards come in a galvanised finish as standard, we understand that the aesthetics of every site might not be the same.
As such we can offer the Impeder Bollard 50HD powder coated to any RAL colour you specify, or in a bespoke decorative sleeve, letting you match the look of your site without compromising on security.