Bristorm Beam Fence

Brought to you by ATG Access, the Bristorm Beam Fence comprises a tensioned 2 wire-rope system, supported by line posts terminated at anchor posts and protected by a double-height “W” Beam Arrangement.

When it comes to the Bristorm Beam Fence each fence is infinite in length as long as the maximum distance between anchors is maintained per the manufacturer’s installation manual.

This anti-vehicle HVM fence is comprised of a tensioned two wire rope system in a weave configuration supported by “I” cross-sectioned line posts, terminated at shallow anchor & ground posts and protected with a double-height “W” beam arrangement.

The beam fence consists of the following components:

Anchor post
Ground anchor
Line post
‘W’ beam
Wire rope
Mechanical fittings

The anti-vehicle fence is tested to BSI PAS 68 and successfully stopped a 7,500kg vehicle at 48kph (30mph) with less than a metre of penetration.

To protect the fence from corrosion and give it added longevity the steelwork has been hot-dip galvanised to BS EN ISO1461 as standard.

While the wire rope strands are zinc plated and HDPE coated as per EN 10264-2:2002 or EN 10255-2.

Thicker finishing and powder coatings are available on client request.

The Beam Fence is part of our wider range of perimeter security solutions, alongside the Bristorm Zero Fence.

Technical Data

You can download any product sheets available, detailing the specifications and applications of each specific solution. We understand that every project is unique, and choosing the right product is crucial for its success. Therefore, we encourage you to reach out to us with any queries or concerns you might have.

Our team of experts is on hand to assist you in determining the most suitable options for your specific project requirements. Please don’t hesitate to contact us for personalised guidance and support.

Download the datasheet